Cinetape Replacement Back

NOTES


1. This is a replacement back for the Cinetape horns. It is fixed using the Cinetape’s original 4 screws and once fitted, it allows you to screw a Noga arm’s 1/4” thread directly into the back.


2. It comes with a small blanking plate which gives you the option to completely remove the Cinetape’s pan/tilt mechanism. The blanking plate has to be removed from the replacement back before it is fitted. Make sure all the connecting sprue material is completely removed as well.


3. The back has an hexagonal hole into which you press a 1/4”UNC nut (not supplied!). The nut can be a full or half height one.


4. Available in 7 colours