PRODUCTS
Antenna Cage for Preston MDR-2
This bracket provides enhanced protection for the MDR-2 antenna.
For details, click on the picture on the right
To buy, just click on the button
Antenna Cage for Preston MDR-3
This bracket allows you to run the MDR-3 antenna along the side of the body
for extra protection.
For details, click on the picture on the right
To buy, just click on the button
Cine RT Ultra Sonic Base Lightweight Bracket
This ‘L’ bracket screws into the back of the Ultra Sonic Base using the existing 4 screws and gives you a quick, lightweight method of fixing the unit onto any plate with a 1/4” UNC thread.
For details, click on the picture on the right
To buy, just click on the button
Antenna Cage - Set of 3 for Cine RT System
Protection for all 3 CineRT antennas; High-Bright, Ultra Sonic Base and Handset Unit.
You will need to replace the original cap-head (‘Allen’) screws with ones which are slightly longer. Click on the image on the right for details.
To buy, just click on the button
Cine RT Ultra Sonic Base Bottom and Back Mount
This ‘L’ bracket screws into the back of the Ultra Sonic Base using the existing 4 screws and has two hexagonal holes which accept half height 1/4” UNC nuts to give you a mounting point on either the bottom or back of the unit.
For details, click on the picture on the right
To buy, just click on the button
Code: CRT-USBBM2Q
Teradek Antenna Bridges
Simply slide the bridge over the antennas to stop them becoming loose.
Available in 2 sizes
Code: TER-BDG14
Preston Motor 0.8 Module Gears for DM-1 DM2 DM5
Quarter, half, one and two inch long gears
Uses original Preston screws without any circlip hassle!
Code: PSN-COGH
Code: PSN-COGO
Code: PSN-COGT
Code: PSN-COGQDM5
Code: PSN-COGHDM5
Preston HU-3 Focus Marking Clip-on
This is a really useful guide for when marking up blank HU-3 handset disks.
For details click on the picture on the right.
Code: HU3-FMC
Cinetape Horns Replacement Back for 1/4”UNC Mounting
This is a replacement back for the Cinetape horns and comes with a small base blanking plate for those people who want to also remove the original pan/tilt mechanism.
For details click on the picture on the right.
Code: CIN-BCK01
Preston HU-3 to Cine RT High-Bright LED Display Plus 1/4”UNC
(Inverted Version)
Simple bracket to attach the ‘Cine RT High-Bright display’ securely onto the top of the Preston HU-3 handset in an inverted position. Lightweight, strong and rigid.
This version mounts the display upside down, as shown.
For details, click on the picture on the right.
Code: CRT-HU3PI
Arri WCU-4 to Cine RT High-Bright LED Display
Simple bracket to attach the ‘Cine RT High-Bright display’ securely onto the top of the Arri WCU-4 handset. Lightweight, strong and rigid.Use the existing CineRT’s screws to fix the bracket to the LED display.
For details, click on the picture on the right
To buy, just click on the button
Code: CRT-WCU4
Cine RT Ultra Sonic Base Bottom Mount
This ‘L’ bracket screws into the back of the Ultra Sonic Base using the existing 4 screws and has an hexagonal hole to accept a half height 1/4” UNC nut to give you a mounting point on the bottom of the unit.
For details, click on the picture on the right
To buy, just click on the button
Code: CRT-USBBM
Cine RT High-Bright 1/4” UNC Base
This bracket screws into the back of the High-Bright using the existing 4 screws and has an hexagonal hole to accept a half height 1/4” UNC nut to give you a mounting point on the bottom of the unit.
Click on the image on the right for details.
To buy, just click on the button
Code: CRT-HBQBSE
Antenna Cage for Cine RT Ultra Sonic Base
This is a cage which fixes onto the CineRT Ultra Sonic Base to protect the antenna.
You will need to replace the original cap-head (‘Allen’) screw with one which is slightly longer. Click on the image on the right for details.
To buy, just click on the button
Code:CRT-USBAG
Antenna Cage for Cine RT High-Bright LED Display
This is a cage which fixes onto the CineRT High-Bright display to protect the antenna.
You will need to replace the original cap-head (‘Allen’) screw with one which is slightly longer. Click on the image on the right for details.
To buy, just click on the button
Antenna Cage for Cine RT Ranger/Tracker Handset
This is a cage which fixes onto the CineRT Ranger/Tracker Handset to protect the antenna.
You will need to replace the original cap-head (‘Allen’) M3 screw with one which is slightly longer. Click on the image on the right for details.
Preston HU-3 to Cine RT High-Bright LED Display
Simple bracket to attach the ‘Cine RT High-Bright display’ securely onto the top of the Preston HU-3 handset. Lightweight, strong and rigid.
For details, click on the picture on the right.
To buy, just click on the button
Preston HU-3 to Cine RT High-Bright LED Display Plus 1/4”UNC
Simple bracket to attach the ‘Cine RT High-Bright display’ securely onto the top of the Preston HU-3 handset. Lightweight, strong and rigid.
For details, click on the picture on the right.
To buy, just click on the button
Preston HU-3 Sunshade (10 degree slope)
A strong, lightweight sunshade for the Preston HU-3 handset. Designed to be held on with velcro. The shade is at an angle of 10 degrees from vertical.
Click on the image on the right for details.
To buy, just click on the button
Preston HU-3 Sunshade (straight)
A strong, lightweight sunshade for the Preston HU-3 handset. Designed to be held on with velcro. Straight version.
Click on the image on the right for details.
To buy, just click on the button
Code: HU3-SHD00
Preston HU-3 Sunshade (25 degree slope)
A strong, lightweight sunshade for the Preston HU-3 handset. Designed to be held on with velcro. The shade is at an angle of 25 degrees from vertical.
Click on the image on the right for details.
To buy, just click on the button
Cinetape Horns 1” (25mm) Extension
A push-on extension for the Cinetape horns.
Click on the image on the right for details.
To buy, just click on the button
Code: CIN-HRN25
Alexa Focus Hook
Slides onto the Alexa’s 15mm viewfinder bars to give a more convenient and accessible hook point when running out a tape. Allows the tape to go out straight, instead of ‘up-and-over’ the matt box.
Click on the image on the right for details.
To buy, just click on the button
Cinetape Readout Shade
A strong, lightweight sunshade for the Preston HU-3 handset. Designed to be held on with velcro. Straight version
Click on the image on the right for details.
To buy, just click on the button
Code: CIN-SHD00
Preston HU-3 Endboard Shutter
A small attachment which fits over the Preston HU-3 handset’s ‘run’ button. Just slide the plate across after ‘camera-run’ to prevent accidental cutting of the camera on an endboard take.
Click on the image on the right for details.
To buy, just click on the button
Code: HU3-EBS
Alexa Cable Hook
A strong, lightweight hook which can bolt onto the Alexa handle (3/8” screw) to give you a hook point for cables. Particularly useful when unplugging a camera and moving position.
Click on the image on the right for details.
To buy, just click on the button
Code: ALX-CHK
Micro Force Switch Guard
A small piece which fits the Preston Micro Force 3 to prevent accidental operation of the run switch. It can be held firmly in place with double sided tape on its base.
Click on the image on the right for details.
To buy, just click on the button
Code: MIC-RSG